Fast Car

How to Install a Grille Insert on an Audi TT

1. Insert a flathead screwdriver into the farthest corner of the passenger side front grille and pry down on the tab that sits on the opposite side.
2. Pull the opposite corner of the passenger side grille piece out while pushing down on the tab with your flathead screwdriver. Pull the plastic grille piece out to remove it.
3. Insert your hand through the opening where the passenger side grille was installed and grasp one of the fasteners that are installed along the inside perimeter of the center grille insert.
4. Push the center grille insert out of the bumper by pressing down on the fasteners on the inside perimeter and pushing the plastic piece outward.
5. Insert the flathead screwdriver into the upper right or left corner of the drivers side grille insert and pry the plastic piece out of the bumper.
6. Position the new grille inserts into the bumper and install each by pressing the corners into the bumper so that the grille pieces snap into place. Press down along the circumference of the grille inserts to finish the installation and ensure that each piece is secured.