Fast Car

1. Set the clock. Pull the adjuster button on the left side of the on-board computer screen towards you. Pull it until the date and time display appears. Turn the button to adjust the date and time.
2. Set a speed warning on the car. Press the adjuster button when you reach the desired speed on the speedometer. To clear the speed warning, press the button for at least one second while the vehicle is moving.
3. Set the seat heating for the driver and the passenger. The seat heating knobs are in the four-knob arrangement in the center console under the air vents, with the driver control being the knob closest to the driver and the passenger one the knob closest to the passenger.. Press the knob to turn on the heater. Turn the knob to adjust the temperature.
4. Set the cruise control. While driving press the button on the front of the left control stick containing the indicators when you reach the desired speed. Press the button on the end of the stick to store this speed. Press the brake pedal to switch off cruise control, or slide the front button to the left.
5. Set the drive mode. With the brake applied, move the gear stick to either P for park, R for reverse, D for drive, or S for sports driving. Press the throttle gently to move the car.

1. Insert a flathead screwdriver into the farthest corner of the passenger side front grille and pry down on the tab that sits on the opposite side.
2. Pull the opposite corner of the passenger side grille piece out while pushing down on the tab with your flathead screwdriver. Pull the plastic grille piece out to remove it.
3. Insert your hand through the opening where the passenger side grille was installed and grasp one of the fasteners that are installed along the inside perimeter of the center grille insert.
4. Push the center grille insert out of the bumper by pressing down on the fasteners on the inside perimeter and pushing the plastic piece outward.
5. Insert the flathead screwdriver into the upper right or left corner of the drivers side grille insert and pry the plastic piece out of the bumper.
6. Position the new grille inserts into the bumper and install each by pressing the corners into the bumper so that the grille pieces snap into place. Press down along the circumference of the grille inserts to finish the installation and ensure that each piece is secured.